Effect of Molybdenum on the Microstructure and Oxidation Behavior of Hot-Pressed TaCr2 Alloys

Metal Science and Heat Treatment - Influence of molybdenum additions on the microstructure and corrosion resistance of powder alloys based on the TaCr2 Laves phase is studied. The phase composition...     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.     

高铬铸钢轧辊的组织及其氧化行为

轧辊氧化膜形成及剥落显著影响轧辊的辊耗及钢板的表面质量。为控制轧辊的氧化行为，采用增重法研究离心铸造高铬铸钢轧辊在大气及水蒸气环境中的氧化行为，并采用金相显微镜(OM)、扫描电子显微镜(SEM)、X射线衍射(XRD)等方法研究了高铬铸钢组织及氧化膜的结构。结果表明，高铬铸钢组织为回火马氏体基体和共晶Cr7C3碳化物；氧化过程中基体优先被氧化，粗大碳化物表面几乎不被氧化；温度及环境对氧化膜生长及相结构都有一定的影响，高温及水蒸气环境加速氧化，并促进γ Fe2O3向γ Fe3O3转化。因此，控制轧辊的氧化，关键是控制轧辊的使用温度。     

平面并联机构工作空间的三维螺旋扫描CAD求解

针对平面并联机构无奇异位置工作空间求解困难、过程繁琐、计算量大等问题，提出了基于CAD求解平面并联机构工作空间的三维螺旋扫描方法。将[n]自由度平面并联机构分解成[n]条支链进行独立分析，得到每条支链下末端执行器的可达区域，再将所有支链可达区域取交集即为平面并联机构工作空间。应用SolidWorks软件建立平面并联机构模型，进行几何特征处理，通过自动求解器求解，将求解过程图形化，快速得到同轴布局5R机构和平面3-RPR并联机构的无奇异位置工作空间。通过同轴布局5R机构的运动学实验，验证了该求解方法的可行性。     

Embedded Metal Oxide Plasmonics Using Local Plasma Oxidation of AZO for Planar Metasurfaces

New methods for achieving high-quality conducting oxide metasurfaces are of great importance for a range of emerging applications from infrared thermal control coatings to epsilon-near-zero nonlinear optics. This work demonstrates the viability of plasma patterning as a technique to selectively and locally modulate the carrier density in planar Al-doped ZnO (AZO) metasurfaces without any associated topographical surface profile. This technique stands in strong contrast to conventional physical patterning which results in nonplanar textured surfaces. The approach can open up a new route to form novel photonic devices with planar metasurfaces, for example, antireflective coatings and multi-layer devices. To demonstrate the performance of the carrier-modulated AZO metasurfaces, two types of devices are realized using the demonstrated plasma patterning. A metasurface optical solar reflector is shown to produce infrared emissivity equivalent to a conventional etched design. Second, a multiband metasurface is achieved by integrating a Au visible-range metasurface on top of the planar AZO infrared metasurface. Independent control of spectral bands without significant cross-talk between infrared and visible functionalities is achieved. Local carrier tuning of conducting oxide films offers a conceptually new approach for oxide-based photonics and nanoelectronics and opens up new routes for integrated planar metasurfaces in optical technology.     

铁水预脱硫综合预报模型的研发

为准确预测复合喷吹铁水预脱硫终点硫含量,降低成本并减少二次喷吹,将多元回归模型、增量模型和神经元网络模型相结合,开发了复合喷吹铁水预脱硫综合预报模型。综合模型以增量模型为基础,利用神经元模型动态检索参照炉次,并用多元回归模型进行增量计算及结果筛查,比单一模型的偏差比例降低至少50%以上,提高了模型的准确性和稳定性。其在河钢集团唐钢不锈钢公司实际生产中获得了良好应用,钝化镁消耗率降低10 kg/炉,脱硫一次处理的终点命中率达8%以上,取得了显著的经济效益。     

自然时效对GT35合金组织与性能的影响

采用XRD、SEM、残余应力测试仪、维氏硬度计、测长机等手段对合金物相、微观组织、残余应力、硬度、线膨胀率进行表征,研究自然时效对GT35合金组织与性能的影响。结果表明,GT35合金在自然时效过程中,增强相TiC的形貌与粒径没有明显变化。当自然时效时间小于15天时,GT35合金的硬度、残余应力与线膨胀率逐渐增加,随后逐渐减小并趋于稳定。当自然时效超过90天后,GT35合金的组织与性能趋于稳定,其硬度、残余应力和线膨胀率分别为945.7 HV5、-184 MPa和-2.22×10^-5。     

镍基高温合金锥筒形件拉深旋压成形机理研究

针对镍基高温合金因加工硬化严重成形时极易产生破裂和起皱等典型缺陷的问题,以锥筒形壳体类零件为对象,提出了一种由锥形预制坯经过真空固溶处理后拉深旋压成形锥筒形件的方法,并对其成形机理进行了研究。基于Abaqus/Explicit平台,建立了锥筒形件拉深旋压有限元模型,分析了成形过程中的瞬态等效应力、等效塑性应变、切向应力、壁厚及三向应变分布规律。结果表明:在旋压成形过程中,最大瞬态等效应力位于旋轮接触区及附近区域、最大瞬态等效塑性应变位于坯料口部;瞬态切向压应力最大值位于旋轮接触区,而瞬态切向拉应力最大值位于旋轮接触区附近的两侧区域。筒形段中部壁厚减薄,而坯料口部壁厚增厚。旋压成形试验表明,锥形预制坯经拉深旋压后可获得壁厚均匀的锥筒形件。     

基于VMD与KFCM的柴油机故障诊断算法

针对柴油机的故障诊断问题，提出了一种基于变分模态分解（variational mode decomposition，简称VMD）与核模糊C均值聚类算法（kernel fuzzy C-means clustering，简称KFCM）联合的故障诊断方法。首先，针对VMD算法中分解层数K的选择问题进行了自适应优化；然后，从优化VMD算法的分解结果中选取3个关键分量计算最大奇异值，并将其作为3维的特征向量输入KFCM算法中进行分类识别；最后，对仿真信号以及某型柴油机的模拟故障实验信号使用优化VMD、传统VMD和经验模态分解（empirical mode decomposition，简称EMD）方法分别进行分解与识别。结果表明，笔者提出的方法明显改善了模态混叠现象，提高了模式识别的诊断正确率，提出的联合算法具有更好的应用前景。     

某铜矿重介质产品提铁降硫选矿试验

某铜矿重介质产品铁品位56.24%，硫含量高达9.34%，95.72%的硫以磁黄铁矿的形式存在。为获得硫含量<2%的铁精矿，按磨矿—弱磁选—浮选原则流程对该矿石进行了选矿试验。试验结果表明，在最佳试验参数下，重介质产品经一段磨矿（-0.043 mm 85%）—1粗1精弱磁选—1粗2扫脱硫浮选流程处理，可获得产率45.23%、硫含量为1.52%、全铁品位66.50%的铁精矿，可作为后续钢铁冶炼原料的配矿使用，为此类重介质产品的利用提供技术参考。